IMS v1.15 - release notes

Written By Michael Roberts (Administrator)

Updated at May 27th, 2024

v1.15.13 (2024-05-01) (Build 708)

NEW FEATURES:

  • Aggregate triggers can now be created using a sum (count) of reported 'True' values 

CHANGES:

  • Updated Stat Browser to add support for numeric filters for Dynamic Stats (and LocationStats)
  • The Stat Browser can now filter by Assets or IP Devices selected on the map
  • The Infobox now starts collapsed and in vertical mode on mobile devices

FIXES:

  • Fixed an issue in the Victron SSH integration where None values prevented reporting of stats
  • Fixed an issue where the Infobox sometimes fails to show information for a selected heatmap cell
  • Added an incremental backoff to the retry frequency for failing connections in order to reduce system load
  • Other small fixes and tweaks

POLLERS:

  • Improved the Fluidmesh FM4500 integration to show stats only for the active radio (for master/slave radio) or for all active radios (for APs)

v1.15.12 (2024-04-07) (Build 683)

NEW FEATURES:

  • Users can now view a list of Asset and IP Device Tags via the Manage tab and delete selected tags
  • IMS Triggers can now be created using conditions based on TRUE/FALSE values
  • Trigger alerts can now play an alert sound
  • All triggers can now be made into persistent alerts despite the priority set on it

FIXES:

  • Fixed an issue in the Cambium PTP8XX integration where the wrong interface was displayed in the Infobox
  • Resolved issued with AVI CCMS integrations not displaying connection lines
  • Fixed an issue where IMS Health does not update after a fresh upgrade
  • Other small fixes and tweaks

v1.15.11 (2024-03-16) (Build 659)

NEW FEATURES:

v1.15.10 (2024-02-29) (Build 636)

NEW FEATURES:

  • Users can now bulk update the date/time for all panels on a dashboard tab
  • A trigger can now optionally include the details of the trigger events when creating a ticket

CHANGES:

  • Users can now list all assets or IP devices in a dashboard table, including those with no stats for the selected time period
  • The Stat Browser now shows Location stats as its initial view

FIXES:

  • Fixed the Rajant Breadcrumb poller from having radio interfaces intermittently jump from one device to another

 

v1.15.9 (2024-02-12) (Build 615)

NEW FEATURES:

  • A new visual indicator can be added to Assets with the AHS tag to make them more apparent on the map 
  • IMS can now be used to monitor Komatsu FrontRunner KPI metrics for AHS network performance and comms events
  • A new button on the timeline allows users to jump forwards or backwards by 24 hours in a single click

CHANGES:

  • The InfoBox now includes a collapsible section for generic stats to make relevant data more readily apparent

FIXES:

  • Improved the Victron SSH poller's handling of missing data
  • Improved search results in the IMS Manage Assets tab
  • Improved backend performance for a system with a high number of integrated IP Devices
  • Victron SSH poller: empty values are replaced with a default of '0.0' for compatibility with triggers
  • Other small fixes and tweaks

v1.15.8 (2024-01-13) (Build 594)

NEW FEATURES:

  • IP Device stat aggregations now include Min and Max values for connectivity and latency

CHANGES:

  • The Stat Browser now has a ‘Parent Asset’ column for any IP Device attached to an asset 
  • Improved the display of long asset names

FIXES:

  • Fixed issue where Ivolve trailer locations were not updating automatically  
  • Fixed missing data from Cambium PTP600 integration 
  • Resolved errors and improved stability when using stat_display_filter components 
  • Other small fixes and tweaks

POLLERS:

  • Added rectifier type to Eaton SC300 stats for additional clarity in charting 
  • Added E stop state metrics to the Epiroc Surface Manager DB integration 
  • Temperature stats will be collected for Victron Controller devices where a temperature sensor is connected

v1.15.7 (2023-12-09) (Build 560)

NEW FEATURES:

  • Dashboard charts can now be filtered by radio type (eg Wifi) and category (eg wifi 2.4GHz)

FIXES:

  • Other small fixes and tweaks

POLLERS:

  • Added support for Enhanced Multi Carrier ABC interface to Cambium 
  • NEW listener for AVI UE UDP Stats

v1.15.6 (2023-11-22) (Build 542)

NEW FEATURES:

  • During RF planning, users are now provided with an easy way to select overlapping transmitters while in quick edit mode
  • Added the ability to filter and group by Radio Technology when configuring dashboard charts

FIXES:

  • Fixed colour coding for 2.4GHz and 5GHz frequencies
  • Other small fixes and tweaks

POLLERS:

  • NEW – Teltonika RUT955
  • The Rajant Breadcrumb poller now captures the State Change count for each ethernet port
  • TBox pollers no longer report stats for tanks that are not connected
  • Improved data handling of different Victron devices
  • The Cambium poller now records separate stats for Vertical and Horizontal SNR values
  • Additional registers have been added to the EFOY 2800 poller
  • The 3DP Hornet poller can be configured to use/not use the Hornet’s hostname for IP Devices

v1.15.5 (2023-10-30) (Build 518)

NEW FEATURES:

  • Added two new trigger conditions, radio channel and radio tx power, for Count type triggers

FIXES:

  • Fixed issue where value for Live Latency in Admin screen was blank if left at default value (30 sec)
  • Fixed issue with CCMS data forwarder that causes excessive traffic on port 3337
  • Other small fixes and tweaks

POLLERS:

  • New stats added to Cisco Switch to capture Optical TX dBm, Optical RX dBm, Voltage, Current and CRC Error Count
  • Improved data handling of different Victron devices
  • AVI UE pollers now capture additional Signal and Antenna data 

v1.15.4 (2023-10-07) (Build 495)

CHANGES:

  • Added a timeout notification to milestone camera integration preview page 
  • Operator data is now visible for Minestar FMS assets

FIXES:

  • Fixed path profile error caused by invalid terrain layer 
  • Other small fixes and tweaks

POLLERS:

  • NEW - SCADAPack EFOY 2800 Fuel Cells and Midnite Solar Controller
  • NEW: Comset CM685VX and CM820V-4G LTE Routers 
  • Added UE battery and input voltage to the AVI CCMS poller

v1.15.3 (2023-09-20) (Build 477)

CHANGES:

  • Multiple, individual Eaton SC300 rectifier fields can now be graphed on one chart 

FIXES:

  • Improved report run speed when there are charts with a high number of time series in the report
  • Fixed handling of “Microwave” point-to-point/multipoint devices
  • Fixed the coverage patterns generated for Antenna files
  • Fixed Nokia 7705 polling engine for polling the device when it is being used as an LTE UE
  • Fixed error where IMS Health indicators flicked between red and green
  • Other small fixes and tweaks 

POLLERS:

  • NEW: Trimble Alloy GNSS receiver station
  • NEW: Schneider APC Smart-UPS SRT 8000 UPS

v1.15.2 (2023-08-26) (Build 453)

FIXES: 

  • Fixed issue related to certain dashboard charts that made IMS become unresponsive 
  • Fixed Global Search feature to also search by IP Address 
  • Resolved a duplicate data issue with the JHM Integration 
  • Fixed issue where hidden map layers become unhidden after a refresh 
  • Other small fixes and tweaks 

v1.15.1 (2023-08-05) (Build 432)

NEW FEATURES:

  • Connection lines can now be coloured by the frequency band that is in use
  • The data retention period for non-rollup stats can overridden with a separate config

CHANGES:

  • Made it easier to distinguish between Wifi, LTE and Microwave channels in the infobox

FIXES:

  • Default stat collection for LTE UEs can be toggled off for occasions where the radio chipset is not being used
  • ECI values that were incorrectly assigned to the PCI field in dynamic stats are now in the ECI field
  • Fixed issue where the WLC SNMP poller was obtaining incorrect IP addresses
  • Heat map LTE stats option for PCID/ECI now only shows ECI
  • Other small fixes and tweaks

POLLERS:

  • Updated the Minetec Location Poller to support HMC coordinate system

v1.15.0 (2023-07-17) (Build 407)

NEW FEATURES: 

  • Major new feature: Asset templates are available to assist in creating or updating assets with a known configuration  
  • Users can colour assets by eNodeB Alarm State/Status 
  • IMS now provides aggregated cell utilisation data for eNodeB cells 

 

CHANGES: 

  • Heatmap data field now accommodates Wifi and LTE connected devices 

 

FIXES: 

  • Pop-up history charts no longer average AVI UE PCID stats 
  • Fixed the BreadCrumb API poller to not have gaps in RSSI data 
  • Fixed error that happens when applying a filter to SNR heatmaps 
  • Fixed issue with Hide Results filter on Dashboard Charts not allowing values to be entered 
  • Fixed issue where trigger conditions for Deepsea Generator poller did not accept a value of 0 
  • Fixed issue where AVI UE static stats were not captured for some assets 
  • Other small fixes and tweaks 

 

POLLERS: 

  • FIX – Update FluidMesh 4500 poller to match updated command output 
  • Fix - AVI CCMS poller to report location stats